Manage Chanters

Purpose: Create and maintain your active chanter profile so Note Blaster and Note Battle match your note frequencies. Prefer electronic line-in or USB; analog works after custom calibration. A laptop room mic is unreliable.

Steps

1. Open Manage Chanters and select your chanter’s line-in / USB input (not the laptop mic).
2. Add Digital Chanter for a known model (loads starting frequencies, then Chanter Test) — or Add Custom to name a profile and measure notes yourself.
3. If custom / refining: calibrate notes, save frequencies, then go to Chanter Test.
4. In Chanter Test, confirm the profile and microphone once before games.

Tips

• Most people only need one active profile — switch only when you change gear.
• Prefer a clean line-in/USB signal; lower gain if the level meter clips often.
• Full loop: Calibrate → test → play.

Troubleshooting

• No detection: browser mic permission + correct input device in Manage Chanters / Test.
• Wrong notes: re-calibrate slowly, or start from a model preset then tweak.

Related

Electronic vs analog → · Calibrate → test → play → · Chanter Test FAQ →